By using input power factor correction technology together
with the lastest IGBT power factor components, all UPS
units comply with the worldwide energy saving requirement.
RELIABILITY
By using the most advanced microprocessor to reduce
the size and the number of components, greatly reduce
failvre rate of the UPS. IGBT technology is used to operate
the inverter at high frequency. This enhances reliability
significantely.
AUTO-SENSING
Upon power on, the UPS units will start to perform a
self-test on its components and the load, so as to detect
problems immediately and prevent any errors.
SELF-PROTECION
FEATURE
All UPS units equipped with the self-protection feature,
the systems shuts itself down upon detection of overloads
short circuit low battery voltage, or excessive temperature.
INTERFACES
All UPS units have a COM interface which combiness
serial communication and signaling functions. With the
help of optional UPS software, the serial interface
allows a range of monitoring functions to be implemented.
FRIENDLY STATUS
DISPLAY PANEL
All operation and olad conditions are indicated
by the LCDs. The audible alarm also warns critical operational
conditions for user to save the files you are currently
working on.
Protecion
Power Failure
Lightning and surges
Voltage variations
Voltage and frequency fluctuations
Brownout and overvoltage correction
Improvement the power supply quality
FRIENDLY STATUS
DISPLAY PANEL
All operation and olad conditions are indicated
by the LCDs. The audible alarm also warns critical operational
conditions for user to save the files you are currently
working on.
Applications
Computer centers
Server applications
Networks and workstation
Bank automation systems
Telecommunication systems
Transport systems
TRUE
ON-LINE DOUBLE CONVERSION TECHNOLOGY
During mains power present, the UPS convers
the mains AC voltage to DC to charge the battary and to
supply the inverter with energy. The inverter generates
a sinewave clean AC voltage at all times at the output
of the UPS.
The battery delivers the necessary power to the inverter
if the mains power supplies failur. In case of overload
or short circuit the S.T.S bypass systems guarantees the
mains power automatically switch directly through to the
output load.
Specifications
Model
GEN-1060
GEN-1100
GEN-3100
GEN-3150
GEN-3200
Power Rating
6KVA
10KVA
10KVA
15KVA
20KVA
Input
Number
of Phase
Single
Phase
Three Phase
Voltage
120/220/230/240VAC+20%
208/38/400/415VAC+20%
Frequency
50Hz /
60Hz ¡Ó5%
Powe Factor
>0.97
>0.95
Output
Voltage
SINGLE
PHASE 120VAC/220VAC/230VAC/240VAC
Frequency
50Hz /
60Hz (auto synchronized with mains frequency)
Static
Voltage Regulation
+/-2%
Harmonic
Distortion with linear load
< 3%
Overload
Rating
110%R.M.S
For 10 seconds, 130%R.M.S For 1 second SHORT CIRCUIT PROOF
Crest Ration
3:1
Efficiency
90%
Battery
Type
Maintenance
free sealed lead-acid. 12V/7AH
7AH
11AH
11AH
17AH
26AH
Norinal
Voltage
240V
Back-up
time
Full load
6 min.
6 min.
6 min.
8 min.
10 min.
Half load
19 min.
19 min.
19 min.
25 min.
30 min.
Transfer
Time
Uninterruptible
transfer of 100% load from UPS to bypass & vice versa
Indicator
Load
status, Battery Status, UPS Operation status
Audible
Alarm
Power
failure, Battery mode, Overload, UPS failure
